INSPECTION TEST EQUIPMENTS

LED - RADIOGRAPHY FILM VIEWER

LED - RADIOGRAPHY FILM VIEWER

ULTRA PORTABLE LED - RADIOGRAPHY FILM VIEWER

WG-2 Economy Single Purpose HI-LO ® Welding Gage is designed for internal alignment and determining rootweld spacing.

Internal HI-LO ® gage. Four quick steps check internal alignment
You can check the internal alignment of your fit-up quickly with the WG-2 HI-LO Gage.
1. unlock the retaining screws. Press the gage legs beyond the barrel.
2. insert the legs ( wires ) into the root gap space of the two pieces of pipe to be fitted. Turn the gage 90 º, being careful to apply a constant back pressure to the barrel.
3. Hold the gage as square as possible with the fitting to obtain an accurate reading. Lock the retaining screw, Reverse the 90º turn and remove the gage. You've now ready to read the increment opposite the red line.
4. When the red line aligns with the 1/32 increment you have a good internal alignment and fit-up. Misalignment can be determined from the zero line by increment markings of 1/16 inch.

Rootweld spacing gage. Easy operation determines rootweld spacing.

1. Unlock the retaining screw and insert the gage interior alignment stops between the two pieces of pipe to be fitted.

2. Insert the leg with the long taper into the root gap until it makes contact with both sides of the gap.

Relock the retaining screw, remove the gage and read it.

3. The scale is calibrated in fractional dimensions from 1/32 to 3/16 inch in 1/16 inch increment markings. The readout you receive represents the amount of the rootweld gap.

The G.A.L. Fillet Weld Gauge allows fast, accurate measurement of eleven (11) fillet weld sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, and 1", and their metric equivalents, to determine weld sizes, either concave or convex.

Each gauge blade is made of 1-1/4" x 4" cold rolled stainless steel to resist rust and bending. Blades are deburred to remove rough edges. All sizes and numerals are engraved into the surface for easier reading. The set of seven blades comes in a handy 2" x 4 1/2" pocket case weighing only 4 oz.

For Accurate Calibration of Butt and Fillet Type Welds / GAL Welding Gauges

With the new improved GAL Gauge A.W.S. Gauge shown above it is possible to meet specifications of butt and fillet type welds. New edesigned instrument is pocket sized and easy to operate, new feature includes thumb screw which replaces old hard to perate rivet type.

Diagrams at left illustrate the ease with which welders and inspectors may accurately check sizes of convex or concave fillets as well as butt weld reinforcements.

The convexity and concavity sizes have automatically been predetermined in accordance with American Welding Society D1.1Paragraph 3.6.

GAL Welding Inspection Gauge is precision built of stainless steel with dimensional readings chemically etched and filled for easier reading

GAL Gage Co manufactured high performance welding inspection gauges are highly popular and recommended by welding inspectors.

• Flow Cup Viscometer with stand (ford cup) b-4 made of brass
• Flow Cup Viscometer with stand (ford cup) b-2, b-3, b-5, b-6, b-7, b-8,
• Spare cup for above
• Flow Cup Viscometer (ford cup) b-4, made of brass with certificate
• Zahn Viscometer cup no.1, 2, 3, 4 & 5 with handle

Surftest SJ-210- Series 178-Portable Surface Roughness TesterSeries 178Features

• The 2.4-inch color graphic LCD provides excellent readability and an intuitive display that is easy to negotiate. The LCD also includes a backlight for improved visibility in dark environments.
• The Surftest SJ-210 can be operated easily using the buttons on the front of the unit and under the sliding cover.
• Up to 10 measurement conditions and one measured profile can be stored in the internal memory.
• An optional memory card can be used as an extended memory to store large quantities of measured profiles and conditions.
• Access to each feature can be password-protected, which prevents unintended operations and allows you to protect your settings.
• The display interface supports 16 languages, which can be freely switched.
• An alarm warns you when the cumulative measurement distance exceeds a preset limit.
• The Surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994, JIS B0601-1982), VDA, ISO- 1997, and ANSI.
• In addition to calculation results, the Surftest SJ-210 can display sectional calculation results and assessed profiles, load curves, and amplitude distribution curves.

• Check whether material is magnetised?
• material is properly demagnetized?
• Calibrated in true gauss with high accuracy
• Available in numerous full scale readings with jewelled movement
• Large 2-1/2" face for easy reading
• High stability magnets ensuring long life
• Placed in a helmholtz standard the readings for accurate readings
• Optional padded cases available
• NIST traceable long form certs available
• Customer transfer standards available

• 7/8" & 1-1/4” diam. mirror.
• Lifts 1-1/2lbs
• Strong Neodymium-Iron-Boron magnet.
• All angle ball joint holds mirror firmly at any angle.
• Telescopes from 5-3/4” to 27-1/4” for fast accurate inspection and to retrieve dropped metal objects.
• Handy Pocket Clip.
• Replacement mirror head: E-2HD

Telescopic Inspection mirrors with pick-up tool are known for their seemingly limitless uses both around the home and in the shop. For instance, an telescopic inspection mirror can be used to check behind an armoire for lost keys or beneath an engine block for a missing bolt. Telescopic Inspection Mirrors are popular for welding inspection as gives precise information about weld. These welding inspection mirrors come in a variety sizes and lengths, and feature dual ball-and-socket joints for infinite angle adjustments of the mirror. Circular telescopic Inspection mirror has telescopic extension to reach as below along with pickup tool and pocket clip.

• 4oz Centrobulb Insecticide Hand Duster
• Professional long lasting rugged construction; heavy duty rubber
• This Duster has a 4oz holding bulb; into which dust is placed; and is squeezed to push the dust out the tip located at the top of the duster.
• Small bulb duster for applying fine dust insecticide.Not recommended for use with granular baits.
• Perfect for homeowners and small jobs that require the use of a fine dust insecticide.
• Precision clog resistant tip
• Electrostatically charges dust for cohesion to vertical surfaces
• No metal !! Duster is 100% rubber making ideal for use around electrical outlets and equipment